ENHANCED CLEANER FOR SANITARY TANKS

ENHANCED CLEANER FOR TANKS AND HOSES – SINGLE DOSE OF 10 GR.

Concentrated single-dose sachet for cleaning the entire drinking water system: eliminates biofilm, mucilage and small encrustations from the walls of the pipes and tank.

• By using just one single single-dose sachet of “SANIGEN” per year or better, every six months (recommended), you will eliminate mucilage, biofilm and small encrustations within the drinking water distribution system, both in the tank and in the pipes.
• One sachet is sufficient for tanks up to a maximum capacity of 150 litres.
  “SANIGEN” is a product without SODIUM HYPOCHLORITE (chlorine), it does not damage gaskets, o-rings, membranes, steel welds and other delicate parts of the system.
• Also use SANIGEN to clean: bottles, demijohns, jerry cans, basins, etc. The times remain the same as those described in the instructions.
• Each sachet contains the ready-made dose for 100/150 liters of treatment.

INSTRUCTIONS
1. Empty the entire tank, pipes and boiler by running the pump.
2. Place the contents of the sachet inside the fresh water tank.
3. Fill up on drinking water.
4. Let the water flow in all the pipes, both hot and cold, opening the taps of all the utilities present on the camper.
5. Leave the product to rest in the pipes and tank for at least 3 hours, if possible leave it for longer, even days. The product does not damage gaskets and O-rings.
6. Drain the water from the tank, from the taps of all the users, alternating them, the pressure
of water and the forced flow, will eliminate dirt.
7. Leave the water with the product inside the gray water tank for a day, then drain everything.
8. Fill with drinking water and rinse all pipes. Remember that the boiler contains more water.

ATTENTION
After using “SANIGEN” the system must be rinsed thoroughly.